SCUBAPRO-UWATEC ALADIN SPORT Technical Information download pdf (Page 17)

English

4 Functions during the dive

III UWATEC

Aladin

ONE

III

The decompression alarm is activated if the

decompression stop is ignored. The arrow

STOP

DECO

the decompression stop duration and decompres

sion stop depth begin to flash.

Due to the formation of microbubbles, decompression can increase massively

if a decompression stop is ignored. When the surface is reached during the

decompression alarm, the arrow

STOP

DECO

, the decompression

stop

duration

and decompression stop depth

continue flashing, in order to point to the

risk of a decompression accident. The SOS mode is activated 3 minutes after

the dive if corrective action is not taken (->19).

If the total (cumulative) duration of the decompression alarm is longer than

one minute, it is entered in the logbook.

Descend to the prescribed decompression stop depth immediately!

Total time of ascent

As soon as decompression stops are necessary

Aladin

ONE

shows the total time

of ascent. This includes the ascent time from the current depth to the surface and

all decompression stop obligations.

The total time of ascent is calculated on the basis of the prescribed

ascent rate. Total time of ascent can be subject to change if the ascent

rate is not ideal (100%).

Ascent time greater than 99 minutes is displayed as "– –".

On all dives with Aladin

ONE, make a safety stop for

at least three minutes at a depth of 5 m (15 feet).

STOP

DECO

CNS O

DEPTH

DIVE TIM E

STOP

DECO

CNS O

DEPTH

DIVE

TIME

Total ascent time

Ignored decompression

alarm

WARNING

5 Functions at the surface

5.1 End of a dive

After reaching the surface (<0.8 m/3 ft) Aladin

ONE remains in dive mode for 5

minutes. The delay allows for surfacing for a short period for orientation.

After 5 minutes the dive is closed and it is entered into the logbook.

Aladin

ONE then displays the logbook of the dive and desaturation information

->18.

For the calculations of the desaturation

it is

assumed that the diver breathes air while on the

surface.

DEPTH

DIVE

TIME

CNS O

WARNING

Depth less than

0.8 m (3 ft)

4.11 3-minute safety stop timer

The safety stop timer displays the time span a diver should spend at the safety

stop depth at the end of the dive.

The timer is activated automatically when the diver, after having reached a

depth of at least 10m (30ft), returns to a depth of 5m (15ft) while the no-stop

time is 99 minutes. The safety stop timer will switch off automatically if the

diver descends past 6.5m (20ft) but will restart from 3 minutes as soon as the

diver returns above 5m (15ft)

Safety stop

icons

Remaining

time span

STOP

CNS O

Minutes

Seconds

DEPTH

DIVE TIME

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

SCUBAPRO-UWATEC ALADIN SPORT Technical Information Page 17

Comments to this Manuals

Related products and manuals for Scuba diving fins SCUBAPRO-UWATEC ALADIN SPORT