SCUBAPRO-UWATEC ALADIN SPORT Technical Information download pdf (Page 26)

IV Gauge mode

III UWATEC

Smart dive computers

In gauge mode ALL audible and visual alarms and attention messages are

turned off. This includes ascent speed, low tank pressure and interrupted

signal from transmitter.

In gauge mode TEC will display depth, dive time and tank pressure, the maximum depth is stored, ascent

rate and tank pressure are monitored. By pressing you can switch from maximum depth to tempe-

rature and vice versa. You can also activate the stopwatch and check the split time. Gauge mode does not

support the calculation of no-stop time or the supervision of decompression. Supervision of ppO

max and

CNS O

% will also be switched off. TEC will display no information about RBT or microbubble develop-

ment. Bookmarks can be set. The settings for gas mixtures, MOD and microbubble level cannot be set and

the dive planner cannot be selected.

• Dives in gauge mode are performed at your own risk!

• After diving in gauge mode you should wait for at least 48 hours before

using a decompression computer.

Switching the gauge mode on and off

Gauge mode can be switched on and off at the surface, if no desaturation time

is being prescribed.

After diving in gauge mode, TEC can not be used as dive computer for 48

hours.

Procedure:

1. Bridge contacts B and + until the gauge symbol and "on" or "off" are dis-

played.

2. Confirm with B and E that you wish to activate or deactivate the gauge

mode. The gauge symbol starts flashing.

3. By bridging contacts B and + or B and – the gauge mode is switched on and

off.

4. Confirm your settings with B and E.

Without confirmation the display will disappear after 3 minutes and your

entries will not be accepted.

Diving in gauge mode

After immersion, starting at a depth of about 0.8m (3 ft), TEC automatically sel-

ects gas mixture 1.

The following information is displayed in gauge mode:

Changing the gas mixtures in gauge mode

In gauge mode it is up to the diver to decide on a time and depth to change

the gas mixture. TEC will not indicate a necessary change of gas mixture. For

more information about changing the gas mixture see page 35.

Dive timeCurrent depth

Gauge icon

Maximum depth /

Temperature

Tank pressure

WARNING

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 43 44

Comments to this Manuals

No comments

SCUBAPRO-UWATEC ALADIN SPORT Technical Information Page 26

Comments to this Manuals

Related products and manuals for Scuba diving fins SCUBAPRO-UWATEC ALADIN SPORT